Guangzhou Boente Technology Co., Ltd (Bo Ente Industrial Co., Limited)
Guangzhou Boente Technology Co.,Ltd Bo Ente Industrial Co., Limited
Add to Cart
BNT Conference room digital wireless simultaneous interpretation equipment professional conference system
Introduction:
Simultaneous interpretation system is one of the most advanced and popular office conference systems in the market. It is mainly used for one of the functions of the conference microphone system to achieve real-time translation synchronization.
The working principle of this system is to use infrared transmission for language distribution. It has super confidentiality and is highly praised. It is the most advanced transmission mode in the infrared simultaneous interpretation system on the market at present. It is suitable for all kinds of small, medium and large conference rooms and outdoor places with high confidentiality requirements. The system can modulate and transmit up to 12 languages at the same time. Participants only need to have a light receiver, and they can listen to the speech content by selecting the channel. The system is mainly applicable to international conferences with multiple languages, and it can be applied to signal channels with up to 12 languages at the same time, so that participants can communicate synchronously in real time.
The simultaneous interpretation system mainly transmits the signal of the interpreter station to the infrared signal transmitter through the system host. Then there is the infrared signal transmitter to amplify and transmit the signal. The infrared signal spreads all over the conference room. No matter where you come from, you can use the infrared receiver to receive the interpreter's signal. Transform the infrared signal into audio signal to the participants.
Features:
1. High confidentiality, to prevent malicious interference and eavesdropping.
2. Suitable for small, medium and to the large international conference halls or outdoor venues.
3. Has automatic electrical level control function (ALC).
4. Strong anti-interference ability, free from the interference of light and wireless communication equipment.
5. Connection is simple and fast, reducing the difficulty of the project and reducing the project cost.
6. Adopt the most advanced phase-locked loop technology at present.
7. Appearance design conforms to ergonomics and is exquisite and smooth.
8. With multiple output channels for transliteration, it can be used for recording.
9. With multiple voice input channels, it can modulate and transmit up to 12 languages at the same time.
10. Has the function of indicating the input level, which can directly display the size of the input level.
11. Can be installed in standard 19 inch cabinet.
Parameter:
| Model NO. | BNT220M |
| Product name | Simultaneous interpretation IR Transmitter unit host |
| Channel number | 4/ 6/8/10/12-channel simultaneous interpretation host |
| Modulation | FM / Superheterodyne PLL |
| Carrier frequency | 1.7~4.0MHz |
| Audio frequency response | 100~14KHz |
| Pre-emphasis | 75uS |
| Modulation | ±15 KHz |
| Distortion | <0.5% |
| Channel separation | >70dB |
| RF output level | 700mV |
| RF output impedance | 50 Ω |
| input resistance | 18KΩ |
| Maximum input level | 2V |
| AGC range | 30dB |
| Signal to noise ratio | >75dB |
| Interpreter desk interface | DB25(FEMALE) |
| Audio input | RCA unbalanced × 12 |
| Audio output | RCA unbalanced × 12 |
| RF input / output | RF output BNC Plug × 2 |
| Operating Voltage | AC110-240 |
| power consumption | 40W |
| Indication / display | Channel level indication |
| Frequency stability | 10PPM |
